The basket occasionally went in the dishwasher which cleaned the surface, but the well gunked grease has been building up.
Tried soaking the basket in soap and hot water. Scrubbing with a soft sponge. And then running the dishwasher multiple times but it only got a small part of the grease out.
This is probably going to be an unpopular opinion, but here it is anyway. If it doesn’t come off with dish detergent and a scrub sponge, just call it a permanent seasoning and let it be. If scrubbing it like mad won’t make it come off, then it won’t come off if your food touches it.
Try soaking it again overnight but with dishwasher detergent instead of normal dish soap
Simple Green is my go to degreaser when dish soap and hot water don’t cut it.
Don’t use anything harder than the sponge because the antistick lining is coming off of mine
This is the other issue. Grease would come off using a metal sponge. But that would demolish the “antistick” coating which the grease is sticking to.
I need something which dissolves the greases adhesion to the airfryer pan so a soft sponge can wipe it off.
Maybe that ‘barkeepers friend’ stuff
Silly suggestion, and no idea if it will work, but it’s an easy one to test;
Get some cooking/vegetable oil, and see if it will help dissolve the residue by putting a bit on some kitchen towel and either scrubbing with the oiled paper towel or leaving that towel on the residue for 10 mins and seeing if the grease has softened.
If the oil does seem to dissolve/soften the grease residue then you can add some bicarb/salt to act as gentle abrasive as it won’t dissolve in the oil as it would do in water
I’ve used cooking oil to dissolve tar/bitumen paint from my skin and clothes before and you can then use soap to clear the dissolved tar in oil.
Otherwise use a kitchen degreaser like you’d clean a traditional oven with.
I imagine what’s happening with the oil is something akin to polymerization, so you either need to break the polymers bonds or dissolve in a suitable solvent
Not silly, that’s a common cleaning technique from janitor/cleaning staff i was told a while back. Use a little bit of what causes the stain/gunk and it helps break down the bonds by binding with the already-solidified object and trying to mix with it, weakening/changing the concentration of the ‘stuck’ substance
You could try oven cleaner…
I do this with ours. Spray it and let sit for at least half an hour in the sink. Hose off the caustic with hot water, then nylon brush the residue.
Hose off the caustic with hot water
Wear eye protection if truly hosing. You don’t want that shit in your eye.
Maybe im just a slob, but as long as it doesn’t feel greasy I really don’t mind the baked on grease. I still wash it. While it’s still hot ill fill it with soap water then scrub it out with a bottle brush. Im not stressing over the stains though.
I preheat the air fryer to soften the fat and oils. Drain whatever I can into a container, and use a silicone spatula to get anything that is still adhered.
It then goes in the dish washer on a hot wash. Come out like new.
I could never fix my gunked up old one. I tried dishwasher, hot water, store brought anti-grease soap or what, nonthing. Had to yeet it. The new one i wash religiously and after a round in the dishwasher, i scrub it down before using it. I’m afraid your old one might be beyond help
Same here. If you build up layers of oil and stuff on the basket it’s never coming out. It’s not a big deal IMHO.
Maybe a good soak in vinegar, then alcohol
Most of what I know about grease comes from industrial machinery. Maybe it doesn’t transfer over well. Steam is also a good option.
When fats get to high enough temperature they polymerize, on cast iron we call it seasoning. If you let the grease build up, and go through many cooking cycles your actually trying to get rid of polymers
I clean mine by soaking in hot water and scrubbing with a nylon bristle dishwashing brush. I don’t have a dishwasher. This is working great, but the key is I’m doing it after every 2nd or 3rd time I use the air fryer.
It’s a new one, we had to throw our old one out because we didn’t wash it well enough and it gunked up so badly it was almost unusable and started smoking whenever you turned it on.
I did get the gunk off with thorough scrubbing but it damaged the shit out of the non stick coating, we weren’t gonna risk using it like that.
Taking real good care of the new one.
